Stampin Up Birthday Fiesta Card for Mojo Monday #461

Hi there stampers and happy hump day!  For today's card I am playing along over on the Mojo Monday Sketch Challenge to create this fun birthday card using Birthday Fiesta bundle from Stampin Up!  The sketch for this week is below:

I started with a piece of whisper white cardstock cut to 4.25 x 5.5 and used several images from the Birthday Fiesta stamp set to create my own patterned paper.  I used the catus and two flower images from the set and stamped the entire piece using emerald envy, melon mambo, and crushed curry inks. I then stamped the llama image in soft suede and added the blanket pattern using melon mambo.  I used the coordinating Fiesta Time Framelits to cut the llama out.

I then inked up an entire paper doily using the emerald envy stamp pad and cut a circle from melon mambo cardstock using the retired circle framelits.  I then inked up the edges of the melon mambo circle with some emerald envy using a sponge.  

I cut down the patterned piece to 4 1/8 x 5 3/8 and adhered the doily to the center using Tombow Multipurpose glue.  I adhered the melon mambo circle using some snail adhesive.  I then stamped the  sentiment onto a piece of vellum using versamark ink and heat set the sentiment with copper embossing powder.  I adhered the vellum onto the front of the card by folding the sides to the back and using masking tape to hold the sides down.  I adhered the llama to the front with dimensionals.

I adhered the entire piece to an A2 top folding card base made from emerald envy cardstock.  I then added some Wink of Stella to the blanket on the llama to give the card more bling and shine.  That finished the card.  To see how I made the card, you can watch my video in HD on my YouTube channel HERE, or watch below:

 photo SHOP LINK.png

Photo Album for Savannah

Happy weekend stampers!  Today's project was a hard one to make, not creative wise but more emotional.  One of my best friends recently lost his dog to a tragic accident and I wanted to do something special for him and his girlfriend.  I knew just a card wouldn't be enough as I loved his dog and was heart broken when she passed away.  I decided to make a photo album instead of a card.  
I do not have a lot of experience making photo albums so wasn't sure how it would all come together.  I made a very basic constructed album and am happy with the end result.

I started with 8.5 x 11 inch soft suede cardstock and cut two pieces in half on the 8.5 side to give me 4 pieces of 4.25 x 11 sized cardstock.  I then scored three of the pieces in half at the 5.5 mark.  I only needed three of the four I cut.  After scoring at 5.5, on two of the pieces I scored them again at the 1/2 inch mark from each long side so when you folded the piece in half the result was a 5.5 x 4.25 card with score marks at the 1/2 inch on each of the long sides.  

I then glued one piece to the other by adhering two of the 1/2 inch score marks together to form one long accordion style piece of cardstock.  For the outer cover, I took the remaining piece of cardstock and scored it at the 5.5 mark but then scored another 1/2 from each side of the 5.5 score mark.  This would allow additional room to glue the other pieces to the center and still be able to close the cover.  

I cut a heart shape out of the front cover using some retired heart framelits I had in my stash.  I then cut a heart frame from some real red cardstock using the same framelits and glued to the front of the cover.  I cut out the love sentiment from the Sunshine Wishes thinlits out of some silver glimmer paper and adhered to the front as well.  I then added the pictures and some black frames I made using basic black cardstock and retired square framelits.  I added some hearts made from punches to decorate the pictures.

I am so happy to have this project completed.  I have been looking at the pictures for a couple weeks and was just too sad to put the album together but I really wanted to do something special for my BFF.  I hope this brings them smiles and memories of all the times they shared with sweet Savannah. She was a great dog and will be missed.

 photo SHOP LINK.png

Rainbow Layered Star Birthday Card

Hi there stampers and happy Thursday!  Today's card was inspired by Jennifer McGuire who has the most amazing cards!  If you aren't following her blog and YouTube channel, well you are missing out so get over there and subscribe.  She had a video showing the technique for this card and it just blew my mind.  I knew I wanted to CASE her creation but make my card a rainbow.  Go check out her blog post HERE to see where I got this idea.
I started with a rainbow of colors cut to 4 1/4 x 5 1/2 pieces.  The colors I am working with in rainbow order are: real red, pumpkin pie, daffodil delight, pear pizzazz, pool party, marina mist, and wisteria wonder.  I took the fourth die from the center of the Star Framelits and cut out the star image from the same location of each color of cardstock.  How I did this is I worked with two pieces at a time, placed the star die in the middle towards the top and secured it with tape, then sent it through my big shot.  This left an impression in the next cardstock below so I could use that to align the die perfectly and add another piece behind to get the indention in that piece.  I continued this process until all colors had been cut with the star die.

I then cut each piece using my paper trimmer in the same place across the star which was at the 3 3/4 inch mark on the trimmer.  After cutting all the layers, I begin glueing them together in rainbow order.  I started with the bottom pieces and using the indention from the star die, I lined up each piece on top to the indention from the star and glued it down.  I did the same with the top pieces.  I then cut the next size down star die out of all the same colors.  I then glued all the stars together in same color order.

I then glued the stacked star layers on the top and bottom of an A2 top folding card base made from thick whisper white cardstock.  I used my scissors to cut off the excess that was hanging off each end.  I should have paid more attention to where I lined the top of the star up to the top of the card.  After I glued it down to the card front and cut the excess off, I realized I glued it down too far up which resulted in me cutting the top of the star off.  However I wasn't going to start over so I just went with it.  

To finish the card, I glued the stacked star in the center of the layers and added some sparkle from my Spectrum Noir clear sparkle. I then heat embossed in white embossing powder the sentiment from Me=Grateful stamp set.  

I did film the process for making this card and am working on editing the video.  I will have the video up soon on my YouTube channel so stayed tuned for that.  If you are not a subscriber to my channel, head on over and subscribe HERE.  Be sure to also subscribe to Jennifer McGuire as I mentioned earlier in my blog post.

 photo SHOP LINK.png

Stampin Up Falling Flowers Watercolor Birthday Card Using Kuretake Gansai Tambi Watercolors

Hi there stampers!  I have a gorgeous watercolor card to share with you today including a video to show you how to make it yourself.  I used the Falling Flowers stamp set and coordinating May Flowers thinlits.  I just love this bundle as the flowers are perfect for watercoloring.  In the video I show you how easy Stampin Up makes it to line up the thinlits with the stamp to get perfect die cut images.  
I started with a piece of watercolor paper and working on the smooth side I stamped all the images using Versamark ink and heat set them with white embossing powder.  I stamped several of each image as I knew I wanted to create floral arrangements on the corners of my card.  After heat embossing the images, I watercolored each image using the Kuretake Gansai Tambi watercolors. 
I applied clean, clear water to each heat embossed image before applying the watercolor.  The great thing about watercoloring heat embossed images is the raised edges of the heat embossing keeps the color from spreading and mixing.  I heat set all the images before using the coordinating dies to cut them out using my Big Shot.

I cut out a frame from some retired Shine On DSP using Lawn Fawn stitched rectangle dies.  I created an A2 top folding card base from thick whisper white cardstock and sponged on pool party ink to the front of the card.  After sponging on the pool party ink, I glued the Shine On frame to the front and started to arrange my die cut images to create floral arrangements.  After arranging all my die cuts I used some Press n' Seal to pick up all the die cuts at the same time and to keep my original arrangement.  

I then used the painted friend die from Simon Says Stamp to cut out the sentiment from some silver glimmer paper and from a piece of fun foam.  I glued the glimmer die cut to the from cut piece to give the sentiment some dimension.  I then glued the floral arrangements to the front of the card along with the friend sentiment.  

I then stamped the happy birthday sentiment from the Birthday Banners stamp set in some Versafine Onyx black ink and heat set using clear embossing powder onto some vellum.  This was adhered to the front of the card using foam adhesive.  

I have started to finish the inside of my cards when I make them so they are ready to mail to friends and family.  I adhered the middle piece of that frame to the inside and cut out an additional sentiment from the Birthday Banners stamp set with the coordinating dies.

You can watch my video on how to make this card on my YouTube channel HERE, or watch below:

 photo SHOP LINK.png